What Venting Kit Do I Need for My Pellet Stove?

Question: What piping kit do I need?  What comes with the pipe kit? Do I need 3 inch or 4 inch pipe? Does the pipe kit come with everything I need?

Answer:  For our free-standing stove models, you will need some way to vent exhaust outside, usually directly through an exterior wall.  On our site, we offer DuraVent pellet vent kits with or without a short vertical rise. 

We also carry a pipe kit specifically for chimney insert applications.

The HP22i chimney liner kits come with the clean out tee, 20-30ft of flexible pipe, a chimney boot plate, and a vertical exhaust cap.

The option for a vertical rise (recommended) comes with an appliance adapter, a clean out tee, four 12" sections of pipe, a wall thimble, and a horizontal cap to end the exhaust line.  The horizontal kit comes with an appliance adapter, a single 24" section of pipe, a wall thimble, and horizontal exhaust cap. 

You will need the 4" kit and usually a fresh air intake, if you are installing at or above 5000ft in elevation, installing in a manufactured home, or exceeding the recommended equivalent vent length calculations (EVL) found on pg. 13 of our online manuals:  https://comfortbilt.net/pages/stove-manuals

You can find all of our available piping kits here:

https://comfortbilt.net/collections/piping-kits-1 (US customers)

https://comfortbilt.ca/collections/piping-kits-1 (Can customers)

*See attachments for illustrations