The auger should take about 30secs to make a full rotation when in "auger priming mode". The best way to test this out will be to put a mark on the auger. Then follow the instructions below to have the auger spin and time it to make sure its around 30s for a rotation or 2 RPM.
To perform an auger priming:
Press the Secondary function button (7) - the indicator red light will come on (3).
Now press the Enter button (11)
A message saying "Feeding on" will display under the house.
Let the auger feed until the pellet drop becomes steady.
Then press the secondary function button (7) again to stop the priming.
Comments
0 comments
Article is closed for comments.